 
|
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Polymer Industries' Densetec® HMW is the extruded material needed when Densetec® HDPE is not enough and Polyslick® UHMW™ is not necessary. Densetec® HMW has higher impact strength than HDPE and is more abrasion resistant. The fact that Densetec® HMW is more wear resistant than standard HDPE, and is more economical than standard UHMW makes it the ideal material for wear applications and machined parts. It may also be used in applications such as snowplow linings and fertilizer spreaders.
| Noise reduction Low temp properties Good sliding qualities Stress crack resistant RoHS & REACH compliant |
Moisture resistant Low coef of friction High impact strength Excellent wear resistance Excellent chemical resistance |
 |
standard extruded finish |
|
| Smooth | ||
 |
standard compression molded finish | |
| Planed | ||
| Note: Other sizes, colors, formulations and forming grade available upon request | ||
| Bins Hoppers Ice Rink Floors Reclaim Hoppers Wear Applications |
Chutes Conveyors Silo Liners Truck Liners Vibratory Feed Pans |
Scrapers Dock Fenders Snow Plow Liners Fertilizer Spreaders Various Machine Parts |
 |
 |
 |
|
| *Natural | White with silicone | Black | |
| *FDA approved colors |
|||
| STANDARD: | Extruded inch / mm |
Compression Molded inch / mm |
| Thickness | 0.03 - 1 / 0.8 - 25 | Not a Standard Product |
| Sheet Size | 48 x 96 / 1220 x 2440 48 x 120 / 1220 x 3050 |
| CAPABILITIES: | Extruded inch / mm |
Compression Molded inch / mm |
| Thickness | 0.03 - 1.25 / 0.8 - 32 | 0.5 - 4 / 12.7 - 100 |
| Width | 45 - 144 / 1140 - 3655 | 48 - 96 / 1220 - 2440 |
| Length | Up to 480 / 12200 |
Up to 240 / 6100 |