 
|
|||||||||||||||||||||||||||||||||||||||||||||||||||
Polymer Industries' Densetec® HDPE Pipe Grade is a higher molecular weight material than our standard Densetec® HDPE. The material displays improved performance characteristics in a variety of piping applications. In addition, the material is UV stabilized and ideal for use in demanding outdoor applications. It retains its properties between -220°F and 180°F and resists most chemicals. It is also NSF certified under Standard 61 to be used in potable water piping systems. Densetec® HDPE Pipe Grade can be used in a variety of applications including manhole lids and bottoms, pipe reducers, trenches, sumps, pipe flanges, pipe end caps, tanks, milled flange adapters and lifting lugs.
| UV resistant Great weldability High tensile strength Stiffness for machine parts RoHS & REACH compliant |
Formable Chemical resistant Stress crack resistant Scratch & Abrasion resistant NSF 14 and 61 certified for potable water |
|
| Standard product: ASTM D3350 class 445474C / PPI designation PE4710 and PE80 Available product: ASTM D3350 class 445576A / PPI designation PE4710 and PE100 |
||
 |
standard extruded finish |
|
| Smooth | ||
 |
standard compression molded finish |
|
| Planed |
| Water Mains Aquatic Piping Aeration Systems Agriculture Pipelines Skid and Deflector Plates Hazardous Waste Transfer |
Acid Transfer Pipe End Caps Gravity Sewers Drainage Systems Roll Stand Bearings Milled Flange Adapters |
Pipe Flanges Machine Parts Pipe Reducers Tanks & Containers Guides and Wear Plates Manhole Lids & Bottoms |
 |
| Black |
| STANDARD: | Extruded inch / mm |
Compression Molded inch / mm |
| Thickness | 0.03 - 1 / 0.8 - 25 |
Not a Standard Product |
| Sheet Size | 48 x 96 / 1220 x 2440 48 x 120 / 1220 x 3050 |
| CAPABILITIES: | Extruded inch / mm |
Compression Molded inch / mm |
| Thickness | 0.03 - 1.25 / 0.8 - 32 | 0.5 - 4 / 12.7 - 100 |
| Width | 45 - 75 / 1140 - 1900 | 48 - 96 / 1220 - 2440 |
| Length | Up to 480 / 12200 | Up to 240 / 6100 |